How it Works
The Slide Fire® stock makes it easier to safely and accurately bump for your rifle. The Slide Fire® stock is fun, exciting and entertaining. As always, practice safe firearm procedures when using any firearm.
1. Position Firearm
With the rifle in a safe position and proper aim on the target, pull the stock into your shoulder and grip the pistol grip as normal. Make sure you are in a stable stance in preparation for the recoil of the rifle.
2. Unlock Stock
The Lock Switch location will vary depending on model, so refer to your stock’s instructions. Rotate the switch to the unlocked position to enable rapid fire. Returning the stock to the locked position will restore standard fire.
3. Position Trigger Finger
For ambidextrous models, ensure that the Finger Rest is on the opposite side of the rifle from your shooting hand. Place your trigger finger across the trigger, and seat the tip firmly on the rest.
4. Apply Forward Pressure
Use your support hand to apply a light forward pressure to the rifle. This will force the trigger into your finger causing a round to be fired.
5. Control Rapid Fire
Recoil from the discharged round will cycle the action and return the firearm back to the rear position. Maintaining a light and consistent forward pressure will continue the firing sequence.
Make sure you keep your forward pressure as light and consistent as possible. Applying too much force will push out the recoil needed to operate the rifle causing a stoppage.